Basic lighting design on stage we should pay attention to fire safety issues

In the Auditorium renovation the most important task is the stage lighting design, not only to ensure the gorgeous stage lighting design, but also to ensure that the make stage lighting design achieve fire safety standards. About basic lighting design in stage design fire safety issues need to be noticed.

First, in the auditorium stage decoration, during construction and lifting the temporary lighthouse, we should first get the approval of load capacity and installation method of bearing component from Construction project department. We have to prevent gravity of the fixture from lighting installation side and standing operator side when fixing the towering LED Par Can Light stage light  to avoid dumping accident.

LED moving head spot light DMX 15chs FOCUS 3 facet prism

Second, auditorium stage lighting should be installed on bases, which are not easy to ignite. Also be noted that the distance between the light and curtain or other combustible woven fabric should be greater than 0.5m and distance from the front of the lamp should be greater than 1.5 m. And also, you have to give full consideration to these elements, like lifting, opening and closing curtain, DJ lighting led par light and swinging lamps and natural gas flowing. If it can’t meet the safety distance, then you need to take insulation measures. If it is too close between the curtain and light, then a metal stent or mesh should be set.

RGBWA Led Moving Head Light

Third, when decorating the stage, hanging banner, firing ribbons, flying balloons and setting other air moving objects should be prevented so that it could avoid direct touch, wound or collision with light to cause unnecessary fire disaster.

Fourth, if there are flammable liquids under the LED COB PAR CAN , then galvanized wire fence and baffles made of non-combustible material should be installed in order to reduce the harm caused by glass fragments and hot filament.

Orsam 2R 120w moving head stage

Send your message to us

Required fields are marked *